Rattan is an attractive, lightweight, and durable material for furniture. It’s also eco-friendly, as the plants are fast-growing and plentiful. Whether you choose to display your rattan indoors or out, following these steps will keep your rattan clean and in good repair.
- Dishwashing detergent
- Water
- Soft cloth(s)
- Bowl
- Toothbrush
- Boiled linseed oil
- Lacquer
- Paintbrush
Fill a bowl with water. Add a few drops of dish detergent and stir to agitate until bubbles form on the surface.
Dip a soft cloth into the bubbles only, not into the water.
Wipe the rattan with the bubbles. The slight moisture cleans without over-wetting the rattan, which can cause damage.
Use a toothbrush or other soft brush to clean in the cracks and crevices, using the same suds-only cleaning method.
For a thorough cleaning or to remove stains, apply detergent and scrub with slightly more water than you do for routine cleaning. As soon as you’re done, dry the rattan with a hot hair dryer or set it out in the sun. Once the rattan has dried completely, apply a coat of lacquer with a paintbrush to provide added protection if desired. Repeat annually.
To restore dry, cracked, or split rattan, apply boiled linseed oil with a brush. When the furniture won’t absorb any more oil, wipe it clean with a soft cloth. Allow it to dry or harden before using the rattan again. Make sure you use BOILED linseed oil. Raw linseed oil will not dry or harden. Boiled linseed oil is available at most hardware stores. (You do not actually boil it yourself.)
Although rattan may be used outdoors, it’s best not to leave it in the sun or otherwise exposed to the elements. The material will break down much more quickly under these circumstances.
Place rubber stoppers under the legs of rattan. The cushion helps keep the material from cracking or splitting.
Thanks to How to Clean Stuff for sharing this with us!